跳转到主内容

跳到步骤#3

Calvin Born编辑

编辑已通过 由 Calvin Born

已删除
已添加
不变

步骤行

[* blackred] Locate the Phillips __ screw,screw holding the binding connector to the binding.
[* blackyellow] Use a Flathead screwdriver to anchor the screw on the inside of the binding.
[* black] Then using a Phillips # 00 screwdriver, unscrew the binding connector and set it aside.
[* blackred] Locate the Phillips __ screw,screw holding the binding connector to the binding.
[* blackyellow] Use a Flathead screwdriver to anchor the screw on the inside of the binding.
[* black] Then using a Phillips # 00 screwdriver, unscrew the binding connector and set it aside.