跳转到主内容

跳到步骤#2

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

-[* black] The picture at left (rear panel already removed) shows the locations of the metal clips (shown in red) that snap on to the front display bezel. In the next few steps, you will use a small flathead screwdriver to release these clips from a ridge around the perimeter of the front display bezel.
+[* icon_note] The picture at left (rear panel already removed) shows the locations of the metal clips (shown in red) that snap on to the front display bezel. In the next few steps, you will use a small flathead screwdriver to release these clips from a ridge around the perimeter of the front display bezel.
+[* icon_caution] When prying in the following steps, be sure not to damage the antenna cables that run around the perimeter of the front display bezel.