跳转到主内容

跳到步骤#3

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

-[* black] Insert wisdom here.
+[* black] Insert the flat end of a spudger between the rear display bezel and the plastic rim attached to the front display bezel near the lower left corner of the display.
+[* icon_caution] ***Do not*** try to insert the spudger between the front display bezel and its plastic surround.
+[* black] While carefully prying the rear display bezel away from the display assembly, use a small flathead screwdriver to pry the small steel clip nearest the bottom right corner of the display away from the edge of the front display bezel.
+[* black] Repeat the above procedure until you've released all the clips along the right side of the display.