跳转到主内容

跳到步骤#13

Walter Galan编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Removing the battery/control PCB is even easier than the main board:
[* red]
Remove the seven screwsPhillips screws securing the battery/control board to the upper case.
[* blackicon_note] The D-padD-Pad and I/O buttons are conveniently integrated onto the face of the battery/control PCBboard.
[* black] ThankfullyThankfully, Nintendo redesigned the battery connector to eliminate a [guide|714|long ribbon cable|stepid=3783] spanning the width of the old DSi.
[* black] Removing the battery/control PCB is even easier than the main board:
[* red]
Remove the seven screwsPhillips screws securing the battery/control board to the upper case.
[* blackicon_note] The D-padD-Pad and I/O buttons are conveniently integrated onto the face of the battery/control PCBboard.
[* black] ThankfullyThankfully, Nintendo redesigned the battery connector to eliminate a [guide|714|long ribbon cable|stepid=3783] spanning the width of the old DSi.