跳转到主内容

跳到步骤#11

John编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Removing the main board is a piece of cake:
[* red] Remove the five Phillips screws.
[* yellow] Disconnect the six connectors on the front side, flipside. The bottom white power connector with the black and red cable lifts vertically up like this [http://consolezombie.com/Images/DSi/BottomLCDTouch/thumbs/dsi-power-open.jpg|click here] . Flip the board over and remove the one last connector hiding on the back.
[* yellow] Disconnect the six connectors on the front side, flipside. The bottom white power connector with the black and red cable lifts vertically up like this [http://consolezombie.com/Images/DSi/BottomLCDTouch/thumbs/dsi-power-open.jpg|click here] . Flip the board over and remove the one last connector hiding on the back.
[* icon_note] Whenever unlocking [link|http://en.wikipedia.org/wiki/Flat_Flex_Cable|flat ribbon cable] sockets, use your fingernail to flip up the small retaining flap.