跳转到主内容

跳到步骤#9

Walter Galan编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Pry the following connectors straight up using the flat end of a spudger:
[* red] SD board cable connector
[* yellow] Volume control cable connector
[* black] After separating both connectors, lifticon_note] The lower case should now be completely detachable from the bottom outerupper case offof the DSi.DSi XL
[* black] After separating both connectors, lifticon_note] The lower case should now be completely detachable from the bottom outerupper case offof the DSi.DSi XL