菜单

你的设置

跳到步骤＃4

由 Andrew Bookholt — 编辑

等待批准

已删除
已添加
不变

步骤行

[* icon_note] In this step, you will de-solder the four wires pictured. Mark the wires with a sharpie or a paint marker to keep track of their locations, as each pair of leads is nearly identical.
[* black] Insert wisdom hereDe-solder the four wires boxed in red using the same procedure on the preceding step.
[* icon_caution] Do not apply too much heat to the joints as you de-solder, as the ribbon cable they are soldered to is extremely delicate and melts easily.
[* icon_note] In this step, you will de-solder the four wires pictured. Mark the wires with a sharpie or a paint marker to keep track of their locations, as each pair of leads is nearly identical.
[* black] Insert wisdom hereDe-solder the four wires boxed in red using the same procedure on the preceding step.
[* icon_caution] Do not apply too much heat to the joints as you de-solder, as the ribbon cable they are soldered to is extremely delicate and melts easily.