跳转到主内容

跳到步骤#4

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

+[* icon_note] In this step, you will de-solder the four wires pictured. Mark the wires with a sharpie or a paint marker to keep track of their locations, as each pair of leads is nearly identical.
+[* black] De-solder the four wires boxed in red using the same procedure on the preceding step.
+[* icon_caution] Do not apply too much heat to the joints as you de-solder, as the ribbon cable they are soldered to is extremely delicate and melts easily.

图片1

没有之前的图片

已添加