跳到步骤#3
由 Andrew Bookholt — 编辑
- 已删除
- 已添加
- 不变
步骤行
[* icon_caution] '''Do not''' touch the blue and pink leads above and below the four wires you are de-soldering, respectively, as both wires lead straight to the capacitor. |
[* black] Carefully de-solder the black, grey, white, and orange leads (boxed in red) from the side of the circuit board near the AF lamp. |
[* black] Lightly heat the joint of each lead with a soldering iron as you apply slight tension to the wire with a pair of tweezers. |
[* icon_caution] Do not excessively heat the board. Also, be sure not to accidentally melt the plastic case with the side of the soldering iron. |
[* icon_caution] '''Do not''' touch the pink lead below the four wires you are de-soldering, as this leads straight to the capacitor. |
[* icon_note] Repeat the process until all four leads are de-soldered. |