菜单

你的设置

跳到步骤＃3

由 Andrew Bookholt — 编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Insert wisdom hereCarefully de-solder the black, grey, white, and orange leads (boxed in red) from the side of the circuit board near the AF lamp.
[* black] Lightly heat the joint of each lead with a soldering iron as you apply slight tension to the wire with a pair of tweezers.
[* icon_caution] Do not excessively heat the board. Also, be sure not to accidentally melt the plastic case with the side of the soldering iron.
[* icon_caution] '''Do not''' touch the pink lead below the four wires you are de-soldering, as this leads straight to the capacitor.
[* icon_note] Repeat the process until all four leads are de-soldered.
[* black] Insert wisdom hereCarefully de-solder the black, grey, white, and orange leads (boxed in red) from the side of the circuit board near the AF lamp.
[* black] Lightly heat the joint of each lead with a soldering iron as you apply slight tension to the wire with a pair of tweezers.
[* icon_caution] Do not excessively heat the board. Also, be sure not to accidentally melt the plastic case with the side of the soldering iron.
[* icon_caution] '''Do not''' touch the pink lead below the four wires you are de-soldering, as this leads straight to the capacitor.
[* icon_note] Repeat the process until all four leads are de-soldered.

图片1

旧版本

新版本