跳转到主内容

跳到步骤#8

Elohino Theodore编辑

编辑已通过 由 Jeff Suovanen

之前
之后
不变

步骤行

[* black] Remove the antenna cable from the WWAN card.
-[* black] Push the tabs.
-[* black] The card will pop up to a 45 degree angle.
-[* black] Remove the card by pulling strait away.
-[* black] This only applies if you have a WWAN Card, as not all computers have a WWAN card.
+[* black] Push the tabs. ( Transfer this bullet step to the bullet step below)
+[* black] The card will pop up to a 45 degree angle./ ***Push the tabs, the card will pop up to a 45 degree angle.***
+[* black] Remove the card by pulling strait away./ ***Remove the card by pulling it away from the unit.***
+[* black] This only applies if you have a WWAN Card, as not all computers have a WWAN card./