跳转到主内容

跳到步骤#4

Reed Crosby编辑

编辑已通过 由 Reed Crosby

之前
之后
不变

步骤行

-[* red] Insert a small flat head screw driver into the slot shown. Pry the blue latch up to release the cable.
-[* yellow] Use the pull tab to pull the keyboard connector straight up from the logic board
+[title] Removing Ribbons
+[* red] Insert a small flat head screwdriver or a spudger into the small notch in between holding down the ribbon.
+[* yellow] Grab the metal bar on top of the keyboard connector and pull straight up. The cable should come free.