跳转到主内容

跳到步骤#4

Elohino Theodore编辑

编辑已通过 由 Geoff Wacker

之前
之后
不变

步骤行

-[* red] Insert a small flat head screw driver into the slot shown and pry the blue latch up to release the cable. /***Insert a small flat head screw driver into the slot shown. Pry the blue latch up to release the cable.***
-[* yellow] Use the pull tab to pull the keyboard connector straight up from the logic board./(Is there a particular reason the bullets are red and yellow?)
+[* red] Insert a small flat head screw driver into the slot shown. Pry the blue latch up to release the cable.
+[* yellow] Use the pull tab to pull the keyboard connector straight up from the logic board