跳转到主内容

跳到步骤#4

Richdave编辑

编辑已通过 由 Richdave

之前
之后
不变

步骤行

-[* black] Insert a small flat head screw driver into the slot with a red rectangle around it to pry the blue latch up.
-[* black] Then use the pull tab to pull the keyboard connector straight up from the logic board.
+[* red] Insert a small flat head screw driver into the slot shown and pry the blue latch up ro release the cable
+[* yellow] Use the pull tab to pull the keyboard connector straight up from the logic board.

图片1

旧版本

新版本