跳转到主内容

跳到步骤#4

Matthew Ibanez编辑

编辑已通过 由 Kristen Gismondi

之前
之后
不变

步骤行

[title] Removing Ribbons
-[* red] Insert a small flat head screwdriver or a spudger into the small notch in between holding down the ribbon.
-[* yellow] Grab the metal bar on top of the keyboard connector and pull straight up. The cable should come free.
+[* red] First insert a small flat head screwdriver or a spudger into the small notch in between holding down the ribbon.
+[* orange] Then grab the metal bar on top of the keyboard connector and pull straight up. The cable should come free.

图片1

旧版本

新版本