跳转到主内容

跳到步骤#14

Elohino Theodore编辑

编辑已通过 由 Jeff Suovanen

之前
之后
不变

步骤行

-[* black] Loosen screw 1
-[* black] then 2
-[* black] then 3
-[* black] then 4
+[* black] Loosen screw 1/***With a screwdriver, loosen the four screws.***
+[* black] then 2 (delete this)
+[* black] then 3 (delete this)
+[* black] then 4 (delete this)
[* black] Do not completely loosen a screw.
[* black] Loosen each screw a little bit. Going from 1 then to 2 then to 3 and then to 4. Keep doing this until they are all loose.
-[* black] Loosening one completely with out the other screws loosened may damage the logic board.
+[* black] Loosening one completely with out the other screws loosened may damage the logic board. /*** Loosening one screw without the other screws may damage the logic board.***