跳转到主内容

跳到步骤#14

Reed Crosby编辑

编辑已通过 由 Reed Crosby

之前
之后
不变

步骤行

-[* black] With a screwdriver, loosen the four screws.
-[* black] Loosen each screw a little bit, going from 1 then to 2 then to 3 and then to 4. Keep doing this until they are all loose.
-[* icon_caution] Loosening one screw without the other screws may damage the logic board.
+[title] Heatsink Unscrewing
+[* red] With a Phillips screwdriver, remove the 4 screws on the heatsink, in order of the numbers of the metal.
+ [* icon_caution] Loosening the screws out of order can be damaging.