跳转到主内容

跳到步骤#14

Lauren Murphy编辑

编辑已通过 由 Adam O'Camb

之前
之后
不变

步骤行

[* black] With a screwdriver, loosen the four screws.
-[* black] then 2
-[* black] then 3
-[* black] then 4
-[* black] Do not completely loosen a screw.
-[* black] Loosen each screw a little bit. Going from 1 then to 2 then to 3 and then to 4. Keep doing this until they are all loose.
-[* black] Loosening one screw without the other screws may damage the logic board.
+[* black] Loosen each screw a little bit, going from 1 then to 2 then to 3 and then to 4. Keep doing this until they are all loose.
+[* icon_caution] Loosening one screw without the other screws may damage the logic board.