跳转到主内容

跳到步骤#1

Elohino Theodore编辑

编辑已通过 由 Jeff Suovanen

之前
之后
不变

步骤行

-[* black] Open the screen up all the way (180deg) so the LCD is laying flat on the work surface parallel to the keyboard
+[* black] Open the screen up all the way (180deg) so the LCD is laying flat on the work surface parallel to the keyboard/***Open the screen up all the way to 180 degrees. The LCD screen should be laying flat as well as the keyboard.***
[* black] Use a flat head screwdriver to pry the D620 nameplate off from the right side edge.
-[* black] Gently lift the nameplate off from right to left to expose the 3 keyboard retaining screws
-[* red] Remove the 3 screws
+[* black] Gently lift the nameplate off from right to left to expose the 3 keyboard retaining screws/***On the right and left sides of the nameplate gently lift it to show the 3 keyboard retaining screws.***
+[* red] Remove the 3 screws/***Remove the 3 screws with the screwdriver.***