跳转到主内容

跳到步骤#1

Lauren Murphy编辑

编辑已通过 由 Adam O'Camb

之前
之后
不变

步骤行

-[* black] Open the screen up all the way to 180 degrees. The LCD screen should be laying flat as well as the keyboard.
+[* black] Open the screen up to 180 degrees. The LCD screen should be laying flat as well as the keyboard.
[* black] Use a flat head screwdriver to pry the D620 nameplate off from the right side edge.
-[* black] 'On the right and left sides of the nameplate gently lift it to show the 3 keyboard retaining screws.
+[* black] On the right and left sides of the nameplate, gently lift it to show the 3 keyboard retaining screws.
[* red] Remove the 3 screws with the screwdriver.