跳转到主内容

跳到步骤#1

Reed Crosby编辑

编辑已通过 由 Reed Crosby

之前
之后
不变

步骤行

-[* black] Open the screen up to 180 degrees. The LCD screen should be laying flat as well as the keyboard.
-[* black] Use a flat head screwdriver to pry the D620 nameplate off from the right side edge.
-[* black] On the right and left sides of the nameplate, gently lift it to show the 3 keyboard retaining screws.
-[* red] Remove the 3 screws with the screwdriver.
+[title] Removing Keyboard Bezel
+[* black] Open the laptop's screen 180 Degrees so it is straight back.
+[* orange] Use a flat head screwdriver or a spudger to pry the top bezel off. WOrk it side to side until the bezel is freed from the chassis, exposing 3 screws

图片1

旧版本

新版本

图片3

已删除