跳转到主内容

跳到步骤#3

Nicolas Siemsen编辑

编辑已通过 由 Nicolas Siemsen

之前
之后
不变

步骤行

[* blackred] Remove the 10mm nut on the bottom of the shock.
[* blackred] Remove the 10mm nut on the bottom of the shock.
[* black] Note that if you try to remove this nut you cannot at first as the shaft on the shock turns along with it.
[* blackgreen] There is a flat area on the shaft, just above the large metal washer on the bottom portion of the shock. Place a 7mm crescent wrench on this to prevent the shaft from spinning. Pictured from above.
[* blackgreen] There is a flat area on the shaft, just above the large metal washer on the bottom portion of the shock. Place a 7mm crescent wrench on this to prevent the shaft from spinning. Pictured from above.

图片3

已删除