跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#7

Nicolas Siemsen编辑

编辑已通过 由 Nicolas Siemsen

之前
之后
不变

步骤行

[* black] In the interest of preventing future corrosion consider also replacing the o-ring on the socket where it enters the housing.
[* black] On this car the o-rings were likely original and were fitting very loosely. They were likely allowing moisture to enter the housing.
[* black] Find a suitable replacement in your o-ring kit or at the local hardware store.
[* black] Coat the o-ring with a light coating of silicone grease to ease re-installation as the new o-ring may be a very snug fit. Also, the grease will help improve the seal and preserve the o-ring over time.

图片1

没有之前的图片

已添加