跳转到主内容

跳到步骤#6

Nicolas Siemsen编辑

编辑已通过 由 Nicolas Siemsen

已删除
已添加
不变

步骤行

[* black] Re-install the diaphragm and test the actuator again.
[* black] After cleaning and greasing the diaphragm is now held a solid 16Hg vacuum for several minutes with notno change. There must have been some debris under the edge of the diaphragm letting air in slowly. Now that the leak has been fixed it can be re-installed.
[* black] After cleaning and greasing the diaphragm is now held a solid 16Hg vacuum for several minutes with notno change. There must have been some debris under the edge of the diaphragm letting air in slowly. Now that the leak has been fixed it can be re-installed.
[* black] If cleaning and greasing the diaphragm does not stop the leaks, or if the diaphragm is visible cracked or torn, the actuator will need to be replaced with a new or good/tested used actuator.