修复你的物品

维修的权力

商店

跳到步骤＃17

由 Nicolas Siemsen — 编辑

编辑已通过 由 Nicolas Siemsen

之前
之后
不变

步骤行

[* black] If you found a leak in the line noted in Step 15, serving the trunk and gas door locks, you will need to go to the back of the car and open the trunk to proceed.
[* black] To test the trunk lock actuator you will first need to remove the black plastic cover plate that covers the recess in the rear body panel that the actuator is installed into. Once it is removed you will see the trunk actuator. Pull the red line from the actuator, as this indicates the lock side, and pull a 10 to 15Hg vacuum.
[* blackred] Check for a leak. If it is leaking, you will need to replace the actuator or try and find a replacement diaphragm to repair it. Pictured is a trunk lock actuator with a torn outer diaphragm.
[* blackred] Check for a leak. If it is leaking, you will need to replace the actuator or try and find a replacement diaphragm to repair it. Pictured is a trunk lock actuator with a torn outer diaphragm.

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加