跳到步骤＃11
由 Nicolas Siemsen — 编辑
编辑已通过 由 Nicolas Siemsen
- 之前
- 之后
- 不变
步骤行
| [* black] Connect your vacuum gauge to the line just disconnected from the first "Y" 3-way connector inside the car. |
| [* black] Pump a vacuum of 10 to 15Hg. If this line shows a leak, it means this line is cracked, likely where it passes between the body of the car and the door. If it does not, the line is OK. Make note of the results and continue. |
图片1
没有之前的图片
已添加