修复你的物品

维修的权力

商店

跳到步骤＃10

由 Nicolas Siemsen — 编辑

编辑已通过 由 Nicolas Siemsen

之前
之后
不变

步骤行

[* black] Once inside the car, the lock and unlock vacuum lines travel beneath the carpets and in some places underneath flexible black plastic covers. Begin by removing the floor mat, if equipped, and carpet in the driver's foot well.
[* blackblue] With the carpets removed, look along the end of the foot well nearest the driver's door and find the black plastic cover that protects the vacuum lines beneath. Lift this cover up as shown to expose the vacuum lines.
[* blackblue] With the carpets removed, look along the end of the foot well nearest the driver's door and find the black plastic cover that protects the vacuum lines beneath. Lift this cover up as shown to expose the vacuum lines.
[* red] As mentioned, the red lines are the lines for the lock side of the circuit. The highlighted line is the one that enters the car from inside the door. Note - the top of the picture is facing the front of the car. This line connects to the switch and is the one that you plugged in the previous step.
[* black] Disconnect this line from the rubber "Y" 3-way connector.

图片1

旧版本

新版本

图片2

没有之前的图片

已添加