跳转到主内容

跳到步骤#7

Nicolas Siemsen编辑

编辑已通过 由 Nicolas Siemsen

已删除
已添加
不变

步骤行

[* icon_caution] Reach up inside the shell of the door and gently pull the switch down towards the opening in the door. Do not force the vacuum lines to bend excessively.
[* red] Inspect the switch, especially the metal end. If it looks heavily corroded/rusted or if the metal mechanism on the switch is very loose the switch may be a source of leaks. Consider replacing it. The switch on this car was leaking and was already replaced in this picture.

图片1

没有之前的图片

已添加