修复你的物品

维修的权力

商店

跳到步骤＃4

由 Nicolas Siemsen — 编辑

编辑已通过 由 Nicolas Siemsen

之前
之后
不变

步骤行

[* blue] Inside your driver's door,door you will not find an actuator. Instead, there is a master vacuum switch that controls the actuators in the other three doors. In this picture, it is shown with the two Phillips head screws that hold its bracket in place already removed.
[* blue] Inside your driver's door,door you will not find an actuator. Instead, there is a master vacuum switch that controls the actuators in the other three doors. In this picture, it is shown with the two Phillips head screws that hold its bracket in place already removed.
[* black] When the solid yellow line that you have been testing under the hood enters the firewall, it continues on and passes through a rubber tube between the vehicle's body and the door.
[* yellow] Once inside the door, it connects to the center vacuum connector on the main vacuum switch.
[* black] Step 7Steps 8 and 9 will include disconnecting vacuum lines from the switch. To make this easier, the switch should be detached from the door. The door pull must be detached before this is possible.
[* black] Step 7Steps 8 and 9 will include disconnecting vacuum lines from the switch. To make this easier, the switch should be detached from the door. The door pull must be detached before this is possible.