修复你的物品

维修的权力

商店

跳到步骤＃2

由 Nicolas Siemsen — 编辑

编辑已通过 由 Nicolas Siemsen

之前
之后
不变

步骤行

[* black] ConnectorWith your hand vacuum pump connected to the solid yellow line, with no stripesstripes, you can continue. Go to your driver's door, which should be close at this time, and turn the key in the door the the unlock position. Pull a vacuum of 10 to 15Hg; all the doors on the car should unlock. Wait about 5 minutes to see if the unlock side of the system holds.
[* black] ConnectorWith your hand vacuum pump connected to the solid yellow line, with no stripesstripes, you can continue. Go to your driver's door, which should be close at this time, and turn the key in the door the the unlock position. Pull a vacuum of 10 to 15Hg; all the doors on the car should unlock. Wait about 5 minutes to see if the unlock side of the system holds.
[* black] With your hand pump still connected to the solid yellow line, move the key in the driver's door to the locked position. Pump vacuum again at 10 to 15Hg. The doors should all lock. Leave this vacuum again for about 5 minutes. Make note of the result.
[* black] With your driver's door panel removed you can watch one of the actuators during this process. Pictured are the early style actuators. The first picture shows the door in the locked position while the second shows it unlocked.

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加