跳到步骤＃8
由 Arcane Scroll — 编辑
编辑已通过 由 Jake Devincenzi
- 之前
- 之后
- 不变
步骤行
| [* icon_note] For doors with manual windows, you will need to remove the crank |
| [* icon_note] For doors with manual windows, you will need to remove the crank |
| [* green] Use a finger to push the tab that holds the trim piece to the crank out until it clears the crank. |
| [* green] Pull trim toward the knob on the crank to release the trim. |
| [* yellow] The trim piece will release from the peg at the base of the crank. The crank will now slide off. |
| [* violet] When reassembling the manual window crank, make sure the tapered end of the washer is facing away from the door. |
| [* icon_note] The tapered washer is sometimes missing. It is used to protect the panel from wear. |