跳到步骤#10
由 Arcane Scroll — 编辑
编辑已通过 由 Nicolas Siemsen
- 之前
- 之后
- 不变
步骤行
[* red] On the rear doors, you will need to unplug the window switch from the plug and wire harness in the door before finally removing the panel. |
[* green] For doors with manual windows, you will need to remove the crank on any of the four doors before removing the panel. Use a finger to push the tab that holds the trim piece to the crank out until it clears the crank. |
[* blue] Pull trim toward the knob on the crank to release the trim. It will release from the peg at the base of the crank. The crank will now slide off. |
[* black] When reassembling the manual window crank, make sure the tapered end of the washer is facing away from the door. This piece is sometimes missing. |
图片2
已删除
图片3
已删除