修复你的物品

维修的权力

商店

跳到步骤＃10

由 Arcane Scroll — 编辑

编辑已通过 由 Nicolas Siemsen

之前
之后
不变

步骤行

[* red] On the rear doors, you will need to unplug the window switch from the plug and wire harness in the door before finally removing the panel.
[* blackgreen] For doors with manual windows, you will need to remove the crank on any of the four doors before removing the panel. Use a finger to push the pegtab that holds the trim piece to the crank out until it clears the crank.
[* blue] Pull trim toward the knob on the crank to release the window regulator upwardstrim. It will release from behind the door panel, and then pullpeg at the base of the crank. The crank will now slide off.
[* black] When reassembling the manual window crank, make sure the tapered end of the washer is facing away from the door. This piece is sometimes missing.
[* blackgreen] For doors with manual windows, you will need to remove the crank on any of the four doors before removing the panel. Use a finger to push the pegtab that holds the trim piece to the crank out until it clears the crank.
[* blue] Pull trim toward the knob on the crank to release the window regulator upwardstrim. It will release from behind the door panel, and then pullpeg at the base of the crank. The crank will now slide off.
[* black] When reassembling the manual window crank, make sure the tapered end of the washer is facing away from the door. This piece is sometimes missing.

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加