跳转到主内容

跳到步骤#3

Danno编辑

等待批准

之前
之后
不变

步骤行

[* black] Pull the cooling/processing unit straight up to prevent damage to logic board
[* icon_note] This will require some effort and should be done with caution to avoid damage.
-[* black] The sleeves around the 6 screws may hold it in, if so just take a pair of needle nose pliers and gently squeeze the sleevers until it releases.
-[* black] Pull the bottom, the side towards the bottom of the cpu case, first to move around the bottom coolant sleeve around the heat sinking bracket. *heat sinking bracket not in picture*
+[* black] The sleeves around the 6 screws may hold it in, if so just take a pair of needle nose pliers and gently squeeze the sleeves until it releases.
+[* black] Pull the bottom, then side towards the bottom of the CPU case, first to move around the bottom coolant sleeve around the heat sinking bracket. *heat sinking bracket not in picture*