跳转到主内容

跳到步骤#3

iRobot编辑

编辑已通过 由 iRobot

已删除
已添加
不变

步骤行

[* black] Make sure the settings on your sewing machine are set to sew a straight stitch.
[* black] Slide the corner of your fabric into the sewing machine, directly under the hole in the [[Sewing Glossary#Section_Pressor_Foot|presser foot]].
[* black] Align the edge of your fabric with the edge of the pressor foot.
[* black] This will act as a guide while you sew, and will help you keep you seam straight. In this case, it will leave a quarter-inch [[Sewing Glossary#Section_Seam_Allowance|seam allowance]]. You can use a different guide if you would like.
[* black] Lower the presser foot using the presser foot lever.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加