跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#1

Sam Lewis编辑

编辑已通过 由 Sam Lewis

之前
之后
不变

步骤行

[* black] Place the camera so that the lens would be facing down. Use the phillips head screwdriver to remove the small silver screw in the top right corner.
[* black] Gently peel back the black adhesive tape from the top edge.
[* icon_caution] The tape is attached to the ribbon cable. Be very careful not to tear or damage the ribbon cable when removing the tape.
[* black] Use the plastic opening tool to pry the black locking tab up.
[* black] Gently remove the ribbon cable from the connector