跳转到主内容

跳到步骤#2

BRUCE编辑

等待批准

已删除
已添加
不变

步骤行

[* red] Locate the small ribbon cable that connects the touch screen to the logic board and gentlyboard. Do not pull on this cable.
[* green] Gently lift the hinged black cover on the connector.
[* black] The hinges are near where the ribbon is inserted.
[* black] After lifting the black cover, the ribbon cable will
disconnect it using metal tweezerseasily.
[* red] Locate the small ribbon cable that connects the touch screen to the logic board and gentlyboard. Do not pull on this cable.
[* green] Gently lift the hinged black cover on the connector.
[* black] The hinges are near where the ribbon is inserted.
[* black] After lifting the black cover, the ribbon cable will
disconnect it using metal tweezerseasily.

图片2

没有之前的图片

已添加