跳转到主内容

跳到步骤#3

Jared Cooper编辑

编辑已通过 由 Jared Cooper

已删除
已添加
不变

步骤行

[* black] ExtractFlip the netbook over and extract the eight screws that secure the top cover in place with a PH1 screwdriver.
[* black] Using the flat end of the spudger or fingernail, pry stick, extrude the top cover away from the base by runningwedging the tool alongbetween the base and top covercover and run the tool along the side until the cover pops out.
[* black] CarefullyNext, carefully flip the top cover in front of the netbook to dislocate the touch-pad cablecable from the motherboard.
[* black] ExtractFlip the netbook over and extract the eight screws that secure the top cover in place with a PH1 screwdriver.
[* black] Using the flat end of the spudger or fingernail, pry stick, extrude the top cover away from the base by runningwedging the tool alongbetween the base and top covercover and run the tool along the side until the cover pops out.
[* black] CarefullyNext, carefully flip the top cover in front of the netbook to dislocate the touch-pad cablecable from the motherboard.