跳转到主内容

跳到步骤#3

Jonathan编辑

编辑已通过 由 Jonathan

已删除
已添加
不变

步骤行

[* blackyellow] Flip the netbook over and extract the eight screws that secure the top cover in place with a PH1 screwdriver.
[* blackyellow] Flip the netbook over and extract the eight screws that secure the top cover in place with a PH1 screwdriver.
[* black] Using the flat end of the spudger or pry stick, extrude the top cover away from the base by wedging the tool between the base and top cover and run the tool along the side until the cover pops out.
[* black] Next, carefully flip the top cover in front of the netbook to dislocate the touch-pad cable from the motherboard.

图片1

旧版本

新版本