跳转到主内容

跳到步骤#2

Amos Hine编辑

编辑已通过 由 Amos Hine

已删除
已添加
不变

步骤行

[* red] Pry the four (4) feet with the pick-end of the spudger. These are glued down, therefore this step will require some force.
[* black] Remove each screwthe 6mm PH1 screws located under the four (4) feet. The screws require a PH1 screwdrivereach foot.
[* red] Pry the four (4) feet with the pick-end of the spudger. These are glued down, therefore this step will require some force.
[* black] Remove each screwthe 6mm PH1 screws located under the four (4) feet. The screws require a PH1 screwdrivereach foot.