Skip to main content

Changes to Step #1

Edit by Amos Hine

编辑已通过 by Amos Hine

Deleted
Added
Unchanged

Step Lines

[* red] Remove the 3 screws3screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two 3.5mm3.4mm screws on the right, and use a PH1 for the 10.5mm10.3mm screw on the left.
[* red] Remove the 3 screws3screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two 3.5mm3.4mm screws on the right, and use a PH1 for the 10.5mm10.3mm screw on the left.
[* orange] It is not necessary to fully remove the black screw on the left, but if you do, be careful to not lose the spring from the long, black screw holding the left side of the hard drive.