Skip to main content

Changes to Step #1

Edit by Amos Hine

编辑已通过 by Amos Hine

Deleted
Added
Unchanged

Step Lines

[* yellow] Remove the three (3) screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two screws on the right, and use a PH1 for the one on the left.
[* yellow] Remove the three (3) screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two screws on the right, and use a PH1 for the one on the left.
[* green] Be careful to not lose the spring from the long, black screw holding the left side of the hard drive.