跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#14

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

[* black] Disconnect the DC-In cable from the logic board by simultaneously depressing the locking lever on the connector while pulling it away from its socket.
[* black] Remove the logic board from the outer case.
[* icon_reminder] During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.