跳转到主内容

跳到步骤#3

oldturkey03编辑

编辑已通过 由 oldturkey03

已删除
已添加
不变

步骤行

[* black] Insert wisdom here.Tilt the bottom case slightly toward the trigger buttons to slide it off the top case
[* yellow] Here is a view of the inside of the controller. Note the vibration motors having different counter weights.
[* blue] Remove the connector from the left motor (controller is positioned upside down, left controller will be shown right etc.)
[* black] Insert wisdom here.Tilt the bottom case slightly toward the trigger buttons to slide it off the top case
[* yellow] Here is a view of the inside of the controller. Note the vibration motors having different counter weights.
[* blue] Remove the connector from the left motor (controller is positioned upside down, left controller will be shown right etc.)

图片2

旧版本

新版本

图片3

旧版本

新版本