跳转到主内容

跳到步骤#2

oldturkey03编辑

编辑已通过 由 oldturkey03

已删除
已添加
不变

步骤行

[* red] Remove the seven 9.3 mm T8 Security Torx screws securing the rear case to the front case.
[*
black] Insert wisdom herea plastic opening tool between the front and rear cases along the left edge of the controller. Rotate the tool toward the front of the controller to pry the two cases apart.
[* black] Grasp the controller by the battery compartment and the headphone jack. Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board
.
[* red] Remove the seven 9.3 mm T8 Security Torx screws securing the rear case to the front case.
[*
black] Insert wisdom herea plastic opening tool between the front and rear cases along the left edge of the controller. Rotate the tool toward the front of the controller to pry the two cases apart.
[* black] Grasp the controller by the battery compartment and the headphone jack. Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board
.

图片1

旧版本

新版本

图片2

旧版本

新版本