Skip to main content

Changes to Step #5

Edit by Dave Fixedit

等待批准

Deleted
Added
Unchanged

Step Lines

[* black] Peel back the braid
[* black] Tease out the fibres that are contained within the braid and then cut them off as close to the cable as possible.
[* black] Tease out the fibres that are contained within the braid and then cut them off as close to the cable as possible.
[* black] Split the braid in to two equal parts. Twist each part separately to make two neat wires.
[* black] CutStrip back 3mm of insulation from the inner cablecore. Twist the core by hand and then tin the end.
[* black] CutStrip back 3mm of insulation from the inner cablecore. Twist the core by hand and then tin the end.