跳转到主内容

跳到步骤#2

Spencer Day编辑

编辑已通过 由 Spencer Day

之前
之后
不变

步骤行

[title] Remove the feet
[* black] Gently slide one arm of your angled tweezers into the [link|https://guide-images.cdn.ifixit.com/igi/T3vTSAgRAmEmaD6W.full|recess near the upper right edge|new_window=true] of one of the feet.
- [* icon_note] You can also use the point of a spudger. However, it's much easier to damage the foot.
+ [* icon_note] You can also use the point of a spudger. However, you're more likely to damage the foot.
[* black] Use your tweezers to pry up and remove the foot.
[* icon_caution] The feet may eject very quickly—be careful not to lose them.
[* black] Repeat the process to remove the remaining feet.
[* icon_reminder] To install a foot, align the [link|https://guide-images.cdn.ifixit.com/igi/CRYoq24tvHxFtc6S.full|pegs on the bottom with their cutouts in the frame|new_window=true] and press the foot into place.