跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#5

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

[* icon_note] This step is only required if you have an anti-glare display.
[* red] Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.
[* icon_note] One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[* black] Lift the Bluetooth board/cable retainer assembly out of the upper case.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加