跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#4

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

[* icon_note] This step is only required if you have an anti-glare display. If you have a glossy display, skip to step 12.
[* black] Disconnect the Bluetooth cable by pulling the male end straight away from its socket.
[* icon_caution] Pull the connector parallel to the face of the logic board, not straight up.
[* black] Use the flat end of a spudger to pry the Bluetooth antenna cable up from its socket on the board.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加