跳到步骤＃3
由 Clay Eickemeyer — 编辑
编辑已通过 由 Clay Eickemeyer
- 之前
- 之后
- 不变
步骤行
| [title] Reassembly instructions | |
| [* icon_reminder] ***During reassembly***, follow the above ***three*** steps to reconnect the battery. | |
| [* red] Use your T6 Torx driver to remove the two 3.8 mm‑long screws securing the motherboard shield. | |
| - | [* black] Lift the top edge of the motherboard shield up and flip it over |
| + | [* black] Lift the top edge of the motherboard shield up and flip it over the battery, away from the motherboard. |
| [* icon_caution] Be careful not to crease or strain the cable. |